CISCO CCNA1 Project IPv4 Network Design Configure and Test

CCNA1 – Project
1. Part IA: Complete the IP design for all three groups. 1, 2 and 3.
2. Part II: Test and Configure in packet tracer either group 1, 2 or 3.
Let me know if you have questions.
Part IA – IPv4 Network Design (50 points)
On page 2, you will find an overall network address and the number of hosts for each subnet. (Each group’s will be different.) Create
the network in Packet Tracer, and then design an IPv4 subnet system that meets those requirements, with a minimal waste of IP
addresses. There may be more than one possible solution. Use text boxes to show addresses for each network, default gateways, first
and last possible host addresses, and broadcasts for each subnet on the diagram. Document all addressing on a Word document in
addition to documenting it on Packet Tracer.
Part II – Configure and Test (50 points)
In Packet Tracer, create the topology that represents the router you are assigned. Configure the Ethernet and serial ports of your router
using the IP address system designed in Part IA and IB. Configure the two hosts per LAN, Test by confirming that your PC’s can ping
each other.
Also, configure the router with console, enable secret, and vty passwords. Use “cisco” and “class” as usual. Create a message of the
day. Configure a hostname that represents your team name.
Configure the switches with console, enable secret, and vty passwords as above. Configure a separate hostname for each switch, this
should be the name of the team member who configured the specific switch. Configure all addressing and configuration needed so
that any host can telnet into any switch.
RA
RB
RC
Group 1
Network
Host Requirement
IP Address
RA LAN 1
60
192.168.1.0
RA LAN 2
30
RB LAN 1
40
192.168.2.0
RB LAN 2
20
RC LAN 1
80
192.168.3.0
RC LAN 2
40
Serial 1 (RA-RB)
2
200.165.200.0
Serial 2 (RB-RC)
2
Group 2
Network
Host Requirement
IP Address
RA LAN 1
120
192.168.10.0
RA LAN 2
60
RB LAN 1
80
192.168.20.0
RB LAN 2
40
RC LAN 1
60
192.168.30.0
RC LAN 2
30
Serial 1 (RA-RB)
2
200.165.201.0
Serial 2 (RB-RC)
2
Group 3
Network
Host Requirement
IP Address
RA LAN 1
25
192.168.50.0
RA LAN 2
50
RB LAN 1
70
192.168.60.0
RB LAN 2
35
RC LAN 1
90
192.168.70.0
RC LAN 2
45
Serial 1 (RA-RB)
2
200.165.202.0
Serial 2 (RB-RC)
2

“Place your order now for a similar assignment and have exceptional work written by our team of experts, guaranteeing you A results.”